manualshive.com logo in svg

Cadillac CT5 2020, Owner'S Manual

The Cadillac CT5 2020 Owner's Manual is a comprehensive guide that allows owners to unleash the full potential of their elegant, high-performance sedan. With just a few clicks, you can easily download this manual for free from our trusted manualshive.com, providing all the necessary information to navigate your CT5 with confidence.

Share
Download
background image

Cadillac CT5 Owner Manual (GMNA-Localizing-MidEast-13060107) - 2020 -

CRC - 8/29/19

DRIVING AND OPERATING

187

The following is a DIC display
description and the recommended
usage of each mode:

PTM 1

–

WET

.

Intended for all driver skill levels.

.

Wet or damp conditions only

—

not intended for use in heavy rain
or standing water.

.

StabiliTrak/ESC is on and engine
power is reduced based on
conditions.

PTM 2

–

DRY

.

For use by less experienced drivers
or while learning a new track.

.

Dry conditions only.

.

StabiliTrak/ESC is on and engine
power is slightly reduced.

PTM 3

–

SPORT 1

.

For use by drivers who are familiar
with the track.

.

Dry conditions only.

.

Requires more driving skill than
mode 2.

.

StabiliTrak/ESC is on and more
engine power is available than in
mode 2.

PTM 4

–

SPORT 2

.

For use by drivers who are familiar
with the track.

.

Dry conditions only.

.

Requires more driving skill than
modes 2 or 3.

.

StabiliTrak/ESC is off and available
engine power is the same as
mode 3.

PTM 5

–

RACE

.

For use by experienced drivers
who are familiar with the track.

.

Dry conditions only.

.

Requires more driving skill than in
other modes.

.

StabiliTrak/ESC is off and engine
power is available for maximum
cornering speed.

Press and release

g

to turn off PTM

and return to the TCS and StabiliTrak/
ESC systems. The traction off light

i

and StabiliTrak Off light

i

will

go out.

Limited-Slip Differential

If equipped, the Electronic
Limited-Slip Differential (eLSD) is
automatically activated. eLSD actively
monitors vehicle sensors and driver
inputs to determine the amount of
change for the conditions. With eLSD,
the vehicle has:

.

Enhanced high-speed control.

.

Improved traction through
corners, allowing more
acceleration.

.

More precise steering.

.

Increased vehicle agility.

.

Integration with StabiliTrak/
Electronic Stability Control (ESC).

Summary of Contents for CT5 2020






































































































































































































































































































































Reviews:

No comments

Related manuals for CT5 2020

Daihatsu S85 Wiring Diagrams preview
S85
Brand: Daihatsu Pages: 41
Daihatsu S85 Workshop Manual preview
S85
Brand: Daihatsu Pages: 268
Ecco EW4010 Installation And Operation Instructions Manual preview
EW4010
Brand: Ecco Pages: 9
Ecco EW4009 Installation And Operation Instructions Manual preview
EW4009
Brand: Ecco Pages: 9
TATA Motors Indigo Owner'S Manual & Service Book preview
Indigo
Brand: TATA Motors Pages: 164
JASTEC von-S2 Instruction Manual preview
von-S2
Brand: JASTEC Pages: 12
Warrior Products 10936 Installation Instructions preview
10936
Brand: Warrior Products Pages: 3
Ford 2008 Mustang Quick Reference Manual preview
2008 Mustang
Brand: Ford Pages: 2
Mobis G4211ADE00AL Installation Instructions Manual preview
G4211ADE00AL
Brand: Mobis Pages: 16
Subaru starlink Manual preview
starlink
Brand: Subaru Pages: 216
GMC SIERRA 2002 Manual preview
SIERRA 2002
Brand: GMC Pages: 499
Kia Amanti Owner'S Manual preview
Amanti
Brand: Kia Pages: 290
Mazdaspeed QSEA 51 96Z Installation And User Instructions Manual preview
QSEA 51 96Z
Brand: Mazdaspeed Pages: 8
Safe Fleet RVS-218627 Instruction Manual preview
RVS-218627
Brand: Safe Fleet Pages: 38
MAXWORKS 70275 Instruction Manual & Parts Catalogue preview
70275
Brand: MAXWORKS Pages: 7
Volvo 1996 960 Quick Tips preview
1996 960
Brand: Volvo Pages: 10
Saab 12 787 887 Installation Instructions Manual preview
12 787 887
Brand: Saab Pages: 12
iOttie Aivo Connect Setup Manual preview
Aivo Connect
Brand: iOttie Pages: 58

Brands by name

Popular brands

Load more brands