manualshive.com logo in svg

Cadillac ATS 2018, Owner'S Manual

The Cadillac ATS 2018 offers top-notch performance and luxury, coupled with advanced technology features. To enhance your driving experience, the Convenience/Personalization Manual provides comprehensive guidance on customizing settings. Easily download this valuable manual for free from our website, enabling you to optimize your Cadillac ATS to your preferences and convenience.

Share
Download
background image

Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

11349135) - 2018 - crc - 5/1/17

KEYS, DOORS, AND WINDOWS

51

Warning (Continued)

override, make sure that all people
and obstructions are clear of the
window path.

When the engine is on, override the
automatic reversal system by pulling
and holding the window switch if
conditions prevent it from closing.

Programming the Power
Windows

Programming may be necessary if the
vehicle battery has been disconnected
or discharged. If the window is unable
to express-up, program each
express-close window:

1. Close all doors.

2. Turn the ignition on or to ACC/

ACCESSORY.

3. Partially open the window to be

programmed. Then close it and
continue to pull the switch
briefly after the window has fully
closed.

4. Open the window and continue

to press the switch briefly after
the window has fully opened.

Remote Window Operation

If equipped, this feature allows all the
windows to be opened remotely.
If enabled in vehicle personalization,
press and hold

"

on the RKE

transmitter. See

Vehicle Personalization

0

140

.

Window Indexing (Coupe Only)

If the window freezes to the door,
push the top of the window inward
while opening the door. Clear all snow
and ice from the door and glass.

Then open the window completely
and then close it.

The door can now be closed.

When fully closed, indexing
automatically lowers the window a
small amount when the door is
opened.

When the door is closed, the window
will raise to its previous position.
If either window does not index

properly, it could be due to loss of
power. Before seeing your dealer for
service, program the power windows.

Sun Visors

Pull the visor toward you, or move it
to the side to help reduce glare.

To use the lighted mirror, lift the
cover.

Summary of Contents for ATS 2018








































































































































































































































































































































































































Reviews:

No comments

Related manuals for ATS 2018

Yakima SkyBox 12 Installation Instructions Manual preview
SkyBox 12
Brand: Yakima Pages: 6
Yakima HoldUp Plus2 Manual preview
HoldUp Plus2
Brand: Yakima Pages: 18
Ford F-150 2018 Quick Reference Manual preview
F-150 2018
Brand: Ford Pages: 12
Toyota 1973 Crown Hardtop Owner'S Manual preview
1973 Crown Hardtop
Brand: Toyota Pages: 50
KRAFTWERK Automotive 31006 Instructions preview
Automotive 31006
Brand: KRAFTWERK Pages: 2
Caltrend CV445 Installation Instructions preview
CV445
Brand: Caltrend Pages: 2
Audiovox EM-2201 Installation Instructions preview
EM-2201
Brand: Audiovox Pages: 1
EGR EGR-3PVE-COLOUR Installation Instructions Manual preview
EGR-3PVE-COLOUR
Brand: EGR Pages: 28
VDO VIEWLINE 52 MM - MOUNTING 11-09 Installation Instructions preview
VIEWLINE 52 MM - MOUNTING 11-09
Brand: VDO Pages: 4
SAAS StreetLine Series Installation Instructions preview
StreetLine Series
Brand: SAAS Pages: 4
RAM Truck Diesel Supplement 2012 Owner'S Manual preview
Truck Diesel Supplement 2012
Brand: RAM Pages: 174
Paccar DAF CHARGEMAX 90 User Manual preview
DAF CHARGEMAX 90
Brand: Paccar Pages: 40
I.D. Systems Vehicle Asset Communicator User Manual preview
Vehicle Asset Communicator
Brand: I.D. Systems Pages: 41
Waeco MagicSpeed MS900 Installation Manual preview
MagicSpeed MS900
Brand: Waeco Pages: 120
KlipXtreme Ridesmart KMA-610 Manual preview
Ridesmart KMA-610
Brand: KlipXtreme Pages: 12
BrandMotion 212IFD001N User Manual preview
212IFD001N
Brand: BrandMotion Pages: 12
AUTOTECH 10.297.300K-303K Installation Instructions preview
10.297.300K-303K
Brand: AUTOTECH Pages: 1
Whispbar K477W Fitting Instructions Manual preview
K477W
Brand: Whispbar Pages: 15

Brands by name

Popular brands

Load more brands