Cadillac ATS 2018 Owner'S Manual Download Page 370

Page: 370 / 391

Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

11349135) - 2018 - crc - 5/1/17

368

ONSTAR

Using Voice Commands During a
Planned Route

Functionality of the Voice Command
button may vary by vehicle and
region. For some vehicles, press

open the OnStar app on the
infotainment display. For other
vehicles press

as follows.

Cancel Route

1. Press

. System responds:

“

OnStar ready,

”

then a tone.

2. Say

“

Cancel route.

”

System

responds:

“

Do you want to cancel

directions?

”

3. Say

“

Yes.

”

System responds:

“

OK,

request completed, thank you,
goodbye.

”

Route Preview

1. Press

. System responds:

“

OnStar ready,

”

then a tone.

2. Say

“

Route preview.

”

System

responds with the next three
maneuvers.

Repeat

1. Press

. System responds:

“

OnStar ready,

”

then a tone.

2. Say

“

Repeat.

”

System responds

with the last direction given,
then responds with

“

OnStar

ready,

”

then a tone.

Get My Destination

1. Press

. System responds:

“

OnStar ready,

”

then a tone.

2. Say

“

Get my destination.

”

System

responds with the address and
distance to the destination, then
responds with

“

OnStar ready,

”

then a tone.

Send Destination to Vehicle

Directions can be sent to the vehicle

’

navigation screen, if equipped.

Press

, then ask the Advisor to

download directions to the vehicle

’

navigation system, if equipped. After
the call ends, the navigation screen
will provide prompts to begin driving
directions. Routes that are sent to the

navigation screen can only be
canceled through the navigation
system.

See www.onstar.com (U.S.) or
www.onstar.ca (Canada).

Navigation

OnStar navigation requires the OnStar
Connect Plus service plan.

Press

to receive Turn-by-Turn

directions or have them sent to the
vehicle

’

s navigation screen,

if equipped. The OnStar mapping
database is continuously updated. For
coverage maps, see
www.onstar.com.mx.

Turn-by-Turn Navigation

1. Press

to connect to an

Advisor.

2. Request directions to be

downloaded to the vehicle.

3. Follow the voice-guided

commands.

Summary of Contents for ATS 2018








































































































































































































































































































































































































Search results

Summary of Contents for ATS 2018

Reviews:

Related manuals for ATS 2018

Brands by name

Popular brands

Cadillac ATS 2018, Owner'S Manual

Search results

Summary of Contents for ATS 2018

Reviews:

Related manuals for ATS 2018

Brands by name

Popular brands