Cadillac 2017 CT6 Owner'S Manual Download Page 11

Page: 11 / 341

Cadillac CT6 Owner Manual (GMNA-Localizing-MidEast-9418855) - 2016 -

crc - 12/15/15

In Brief

From inside, press

. See

Power Door Locks

Trunk

To open the trunk:

Press

twice quickly on the

Remote Keyless Entry (RKE)
transmitter.

Press the touch pad on the rear
of the trunk above the license
plate after unlocking all doors.

If equipped, these will also open the
power trunk. See

Trunk

Windows

The power windows only operate
with the ignition in ACC/
ACCESSORY or ON/RUN, or when
Retained Accessory Power (RAP) is
active. See

Retained Accessory

Power (RAP)

198

Press the switch to lower the
window. Pull the switch up to
raise it.

The switches on the driver door
control all windows. Each
passenger door has a switch that
controls only that window.

See

Power Windows

Seat Adjustment

Power Seats

Platinum Seat

To adjust the seat:

Move the seat forward or
rearward by sliding the control
forward or rearward.

Raise or lower the front part of
the seat cushion by moving the
front of the control up or down.

Raise or lower the seat by
moving the rear of the control up
or down.

See

Power Seat Adjustment

Summary of Contents for 2017 CT6






















































































































































































































































































































































Search results

Summary of Contents for 2017 CT6

Reviews:

Related manuals for 2017 CT6

Brands by name

Popular brands

Cadillac 2017 CT6, Owner'S Manual

Search results

Summary of Contents for 2017 CT6

Reviews:

Related manuals for 2017 CT6

Brands by name

Popular brands