Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-MidEast-9369639) -
2016 - crc - 12/9/15
Vehicle Care
307
Removal and Installation of the
Sealant Canister
To remove the sealant canister:
1. Unwrap the sealant/air hose to
access the canister release
button.
2. Press the canister release
button (9).
3. Pull up and remove the
canister.
4. Replace with a new canister
which is available from your
dealer.
5. Push the new canister into
place.
6. Rewrap the sealant/air hose.
Storing the Tire Sealant
and Compressor Kit
To access the tire sealant and
compressor kit:
1. Open the trunk. See
2. Lift the cover.
3. Remove the strap.
4. Remove the tire sealant and
compressor kit.
To store the tire sealant and
compressor kit, reverse the steps.
Jump Starting
For more information about the
vehicle battery, see
.
For the LF4 only, there is an
optional low mass battery that can
be used for Track events. If the
vehicle has the low mass battery
installed and the battery has a low
State of Charge (SOC), the vehicle
can be jump started the say way as
if the regular battery was in the
vehicle using the following
procedure. For more information on
the low mass battery, see
and
.
If the battery has run down, try to
use another vehicle and some
jumper cables to start your vehicle.
Be sure to use the following steps to
do it safely.