RIVER IDROTECH 18 - 24 - 24H2O
33
8.6
DOOR CLOSING FUNCTIONALITY PERIODIC CHECK
Check that door closing assures a correct seal (by means of the “paper sheet” test) and that when the door is closed, the closing
block (X in the figure) does not protrude from the sheet metal it is fixed to. In some products it will be required to remove the
aesthetic coating in order to evaluate any anomalous protrusion of the block with the door closed.
Fig. 55 - Door closing
8.7
FUME PASSAGES CLEANING
Clean the fume passages every year.
Fig. 56 - Remove the screws
Fig. 57 - Remove the inspection cap
• Open the door.
Fig. 58 - Clean with pipe cleaner
Fig. 59 - Vacuum out the ash
Fig. 60 - Clean with pipe cleaner
• Clean with a pipe cleaner and suction any ash accumulated inside
• After cleaning, repeat the operation in reverse making sure the gasket is intact and efficient: if necessary, provide for the
replacement with original spare parts.
