manualshive.com logo in svg

Cadel IDRON 22 AIRTIGHT, Installation, Use And Maintenance Manual, Page: 30 / 56

Share
Download
Cadel IDRON 22 AIRTIGHT Installation, Use And Maintenance Manual Download Page 30

30

AQUOS - IBIS - IDRON

EN

Fig. 28 - 

Display

LEGEND

1

Boiler lighting/shutdown

2

Scrolling of programming menu to decrease.

3

Menu

4

Scrolling of programming menu to increase.

5

Decrease set temperature/programming functions.

6

Increase set temperature/programming functions.

7

Display.

11.2 

MAIN MENU

It is accessed by pressing key 3 (menu). The items that are accessed are:

•  Date and Time

•  Timer

•  Sleep (only with the stove on)

•  Settings

•  Info

Date and time setting

To set the date and time act as follows:

•  Press the “menu” button.

•  Select “Date and Time”.

•  Select by pressing “menu”

• 

Scroll with the arrows and select the variables to be modified one at a time: Day, Hours, Minutes, Day number, 

Month, Year.

• 

Select “menu” to confirm.

•  Modify with the + - keys.

• 

Finally press “menu” to confirm and “esc” to exit.

Timer setting (see relative chapter)

Sleep setting (see relative chapter)

11.3 

SETTINGS MENU

The SETTINGS menu allows to act on the boiler operating mode:

A.  Language.

B.  Cleaning (displayed only when the boiler is switched off).

C.  Feed screw loading (displayed only when the boiler is switched off).

D.  Tones.

E.  External thermostat (activation).

F.  Auto Eco (activation).

G.  Eco-Shutdown T (default 10 minutes).

H.  Pump on T (default 50°C).

I.  Auxiliary boiler (default deactivated).

J.  Pellet recipe.

K.  Smoke rpm % ventilation.

L.  Maximum power (1-5 - default 5).

Summary of Contents for IDRON 22 AIRTIGHT

























































Reviews:

No comments