manualshive.com logo in svg

Cadel IDRON 22 AIRTIGHT, Installation, Use And Maintenance Manual, Page: 23 / 56

Share
Download
Cadel IDRON 22 AIRTIGHT Installation, Use And Maintenance Manual Download Page 23

23

AQUOS - IBIS - IDRON

EN

8 

PLUMBING CONNECTION

8.1 

PLUMBING SYSTEM CONNECTION

IMPORTANT!

If installation of the product involves interaction with another, pre-existing system complete 

with heating

equipment  (gas  boiler,  methane  boiler,  diesel  boiler,  etc.),  contact  qualified  personnel, 

who subsequently will be responsible for conformity of the system in compliance with the 

applicable law in force.

The Company declines all responsibility for damage to persons or things in the event of 

failed or incorrect operation, if the aforementioned warnings are not complied with.

8.2 

CONNECTION DIAGRAM STOVE (AQUOS 15 - 22 / IBIS 15 - 22 / IDRON 15 -22)

Fig. 18 - 

Plumbing connection

LEGEND

A1

3/4”M heating water delivery

A2

3/4”M heating water return 3/4”M

C

3 bar 1/2” M safety valve

E

3/4”M system draining and emptying

8.3 

CONNECTION DIAGRAM FOR HYDRO STOVE EQUIPPED WITH KIT FOR DOMESTIC HOT WATER 

Summary of Contents for IDRON 22 AIRTIGHT

























































Reviews:

No comments