CADDY PF01302, Installation And Operating Instructions Manual

Page: 6 / 60

6
3. GENERAL FEATURES
Maximum log length 20 in (508 mm) / north-south*
Diameter of the flue collar 6 in (152 mm)
Recommended connector pipe diameter 6 in (152 mm) (wood only or combined wood-electric)
Recommended chimney diameter 6 in (152 mm) (wood only or combined wood-electric)
Required type of chimney CAN/ULC S629, UL 103 HT (2100 °F)
Baffle material C-Cast
Alcove installation Not approved
Mobile home installation
‡
Not approved
Shipping weight (without option) 470 lb (213 kg)
Blower (wood or wood/electric options only) 1/4 HP, direct drive, 4 speeds, 1,4 00 CFM
Filter
– dimensions (Width x Depth x Height)
(included with optional blower assembly)
15 in x 20 in x 1 in (381 mm x 508 mm x 25 mm)
Filter
– quantity
1
Particulate emission standard EPA / CSA B415.1-10
USA standard (safety) UL 391, UL 1995
Canadian standard (safety) CSA B366.1, CSA C22.2 no 236
** East-west: through the door you see the longitudinal sides of the logs; north-south: through the door you see the tips of the logs.
‡
Mobile home (Canada) or manufactured home (USA): The US department of Housing and Urban Development describes
“manufactured homes” better known as “mobile homes” as followed; buildings built on fixed wheels and those transported on
temporary wheels/axles and set on a permanent foundation. In Canada, a mobile home is a dwelling for which the manufacture and
assembly of each component is completed or substantially completed prior to being moved to a site for installation on a foundation
and connection to service facilities and which conforms to the CAN/CSA-Z240 MH standard.
4. SPECIFICATIONS
Color Grey
Thermostatic control Yes
Door type Single, glass with cast iron frame
Glass type Ceramic glass
Air return plenum
– dimensions (Depth or Height)
16 7/8 in
Air return plenum
– dimension (Width)
20 1/4 in
Hot air plenum
– dimensions (Depth or Height)
20 in
Hot air plenum
– dimension (Width)
20 in
Ash pan
– dimensions (Width x Depth x Height)
11 ¾ in x 12 in x 2 5/8 in
Clearance
– front
48 in
Clearance
– back wall
24 in from the blower housing recommended service clearance
Clearance
– side wall
8 in without options installed
Clearance
– opposite side wall
24 in
Clearances
– ducts
3 in for the first 6 feet and 0 in after
Clearance
– recommended for maintenance on
option side
24 in
Electric element
– location
Left or right
Electric element
– clearance recommended for
maintenance
24 in
Electric element (maximum output) 11.25 kW
Top cold air plenum option
– material
Galvanized steel
Top cold air plenum option
– dimensions (Width x
Depth x Height)
20 ½ in x 16 15/16 in x 14 1/16 in
Top cold air plenum option
– smoke pipe diameter
6 in
Tested and listed as per applicable standards By an accredited laboratory (CAN/USA)
Warranty Limited lifetime