CADDY PF01302, Installation And Operating Instructions Manual

Page: 32 / 60

32
11.3.1. ICONS DESCRIPTION
Icons Description Icons Description
Wood heating
Green : Heating mode
Yellow : Auxiliary heating mode
Electrical Element
Green : Unit on
Yellow : On hold
Heat pump
Green : Unit on
Yellow : On hold
Displayed when an auxiliary heat source
has been selected.
Settings Distribution blower is in circulation
mode. (CIRC)
Temperature in the hot air plenum
Possible states of the furnace:
HEAT: When the word HEAT is green, the furnace is in heating mode. If the furnace is waiting for a
demand for heating, the word HEAT is written in yellow.
COOL: When the word COOL is green, the furnace is in cooling mode. If the furnace is waiting for a
demand for cooling, the word COOL will be written in yellow.
OFF: The furnace is stopped.
11.3.2. LANGUAGE SELECTION AND TEMPERATURE UNIT
To choose the language and temperature unit, press the "Settings" button. In the "MAIN" menu, choose "SETUP" and
then "GENERAL". Choose the preferred language and temperature unit.
11.4. ACTIVATING AUXILIARY HEATING SOURCE AND SELECTION OF OPTIONS
To activate an auxiliary source of heating or an option on
your furnace, press the "Settings" button. On the “MAIN”
page, choose “SETUP” and “OPTIONS”.
By default, no auxiliary sources of heating or options are selected. To select an option, simply press the white square
to the left of the desired option. When an option is chosen, the selected square turns green.
To confirm the selection of your options, press the button '' SAVE + EXIT ''. This step takes you to a list of questions
about your selections that are essential for their good functioning.