1600VP/1700VP/1800VP
Continuously-variable Pattern Condenser Microphone System with Remote Polar Control
Description
The 1600VP / 1700VP / 1800VP is a continuously-variable pattern
condenser microphone system with remote polar control (patent
pending). The variable polar pattern with remote control allows the
user to precisely adjust the shape of the pick-up pattern for best
performance from a remote location. Utilizing a two-conductor shielded
cable (maximum length 2,000 feet) between the microphone head and
the pattern-control box (VPC-1), the user can adjust the polar pattern
in real time without changing capsules, microphone positions, or
inducing noise in the audio chain.
Special attention has been given to the frequency response and
sensitivity of the microphone system while utilizing the variable-pattern
control to precisely alter the shape of the pick-up pattern. The large-
diameter, low-noise elements produce a frequency response of 40Hz
to 20KHz with a selectable, recessed 80Hz, 12dB/octave high-pass
filter that removes unwanted low-frequency energy when engaged.
The filter control is conveniently located on the control box.
The microphone head is made of commercial grade aluminum, the
control box is made of hardened steel, both manufactured in the USA.
The microphone head and box are powder coated matte black for an unobtrusive yet stylish appearance. Up to six con-
trol boxes can be mounted in one rack unit shelf - Astatic RU1. The polar- pattern dial is positioned for easy adjustment
”on the fly” and can be secured with a single “Flat Style” blank panel when rack mounted.
The 1600VP / 1700VP / 1800VP is designed to resist interference from devices such as cell phones, two-way communi-
cation devices and lighting apparatus. Utilizing our RF Resistant Architecture, the 1600VP / 1700VP / 1800VP meets the
stringent RF standards set by the European Union (see the specification section for more information).
The system comes complete with microphone head, VPC -1 control box, 30' (9.1m) of two-conductor shielded cable
terminated with a TA3F-type connector and 3-pin XLRM -type connector. Also included with the microphone system
is a 3-pin XLRF -type connector on a stainless steel duplex wall plate. Choose the appropriate model number for your
specific application:
Choose the 1600VP
when a suspended system is required. System includes a counter poise string, exclusive
articulating steel hanger, anti-twist thread and rods, 30' of cable, and XLRF -type wall plate.
Choose the 1700VP
when a floor stand version is needed. System includes the MB -1; a feather light 56" boom
and exclusive Clutch Rotation System, this boom can be mounted on any standard microphone tripod or base stand.
Choose the 1800VP
when a podium version is required. System includes the MB-18; an 18" miniature dual-flex
gooseneck with TA3F-type and XLRM-type connectors.
CAD Audio
6573 Cochran Rd. Building
I
Solon, Ohio 44139 U.S.A.
Tel: (440) 349-4900 Fax: (440) 248-4902 Sales: (800) 762-9266
www.cadaudio.com
©2010 CAD Audio
Part No. 46873-92-01 July2010
Two-Year Limited Warranty
CAD Audio warrants that this product will be free of defects in material and workmanship for a period of two years from the date of purchase. In the unlikely event that a defect occurs
CAD Audio will, at its option, either repair or replace with a new unit of equal or greater value. Retain proof of purchase to validate the purchase date and return it with any warranty claim.
This warranty excludes exterior finish or appearance, damage from abuse, misuse of the product, use contrary to CAD Audio’s instructions or unauthorized repair. All implied warranties,
merchantability, or fitness for a particular purpose is hereby disclaimed and CAD Audio hereby disclaims liability for incidental, special or consequential damages resulting from the use or
unavailability of this product.
This warranty gives you specific legal rights and you may have other rights that vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential
damages or limitations on how long an implied warranty lasts, so the above exclusions and limitations may not apply to you.
Note: No other warranty, written or oral is authorized by CAD Audio.
Shipping Instructions
Please call our customer service department at 440-349-4900 for a pre-approved return authorization number.
Carefully repack the unit and return the insured package to: CAD Audio, 6573 Cochran Road, Building
I
, Solon, Ohio 44139.
RETURNS WITHOUT A PRE-APPROVED RETURN
AUTHORIZATION NUMBER WILL BE REFUSED.
If outside the United States, contact your local dealer or distributor for warranty details.
4 of 4
1 of 4
Using the Wall Plate
1.
Attach the upper-support arm
to the wall plate.
2.
Run provided thread to
counterbalance support
(small loop on support).
3.
The microphone head can be
twisted in the hanger to help
correct for rotation if the
thread is not used.
Using the Articulating Steel Hanger
1.
Insert the microphone head into the large
hoop of the hanger.
2.
Line up the microphone head screw hole
and insert security screw.
3.
Run the provided cable through the hanging
hoop (small hoop).
4.
Wrap the cable around the underside of the
pivot joint.
5.
Adjust microphone angle and tighten
thumb screw.
1700VP
1800VP
1600VP
46873_92_01_1600VP_1700VP_1800VP:Layout 1 9/10/10 8:03 AM Page 1
