CHAPTER 2:
INSTALLATION
Page 2-12
ST-500 INSTALLATION GUIDE
2.7
Checking the Installation
Power up the host system. The LANVIEW LEDs on the transceiver indi-
cate normal operation as described in Table 2-1.
Table 2-1. LANVIEW LEDs, Normal Operation
If the LANVIEW LEDs do not indicate normal operation, refer to
Chapter 3 for troubleshooting information.
LANVIEW LED
SQE Enabled
SQE Disabled
Power LED
On On
SQE
On
Off
Transmit
On during host
transmissions
On during host
transmissions
Receive
Flashes to indicate
network traffic
Flashes to indicate
network traffic
Collision
On for collisions on
the network and
host transmissions
On for collisions
on the network
