Caberg JUST SPEAK EVO, User Manual

Page: 19 / 21

JUST SPEAK EVO
19
English
Enabling/Disabling Voice Prompts
Voice Prompt “Voice prompt”
Factory Default Enable
Enable / Disable Press the (–) Button
You can disable voice prompts by configuration setting, but the following
voice prompts are always on.
- Voice prompts for configuration setting menu
- Voice prompts for battery level Indicator
- Voice prompts for factory reset
Delete All Bluetooth Pairing Information
Voice Prompt “Delete all pairings”
Factory Default N/A
Execute Press the (–) Button
To delete all Bluetooth pairing information of the JUST SPEAK EVO,
press the (+) Button until you hear a voice prompt, “
Delete all pairings ”,
and press the (–) Button to confirm.
Reset to Factory Default Setting
Voice Prompt “Factory reset”
Factory Default N/A
Execute Press the (–) Button
To restore factory default settings on the JUST SPEAK EVO, press the
(+) Button until you hear a voice prompt, “
Factory reset ”. Press the (–)
Button to confirm. The JUST SPEAK EVO powers off with a voice prompt,
“ Headset reset, goodbye ”.
Exit Voice Configuration Menu
Voice Prompt “Exit configuration”
Factory Default N/A
Execute Press the (–) Button
To exit voice configuration menu and get back to stand-by mode, press
the (+) Button until you hear a voice prompt, “ Exit configuration ”. Press
the (–) Button to confirm.