JUST SPEAK EVO
13
English
2. If you have a stand alone Bluetooth stereo device, follow the pairing
procedure separately. The procedure is the same as the procedure of
“Mobile Phone Pairing”.
Note:
1. If Bluetooth connection between the headset and a mobile phone is
disconnected, press and hold the (+) Button for 3 seconds to recover the
Bluetooth connection immediately.
2. If Bluetooth connection between the headset and a media player is
disconnected, press and hold the (+) Button for 1 second to recover the
Bluetooth connection and play.
Bluetooth GPS Navigation Pairing
You can listen to voice instruction from Bluetooth GPS navigation. Some
GPS systems use mobile phone profile (HFP, Hands-Free Profile) and
others use stereo music profile (A2DP, Advanced Audio Distribution
Profile). Most motorcycle specific GPS systems use mobile phone
profile for turn-by-turn voice instruction. You can simultaneously use a
mobile phone and a GPS which uses mobile phone profile by one of the
following procedures.
Multipoint GPS Pairing
If you use GPS only for turn-by-turn voice instructions, not for Bluetooth
stereo music streaming, multipoint pairing is recommended for the GPS
connection. Multipoint Bluetooth pairing allows the JUST SPEAK EVO
to connect two HFP devices at the same time: mobile phone and GPS
navigation. Follow the steps below to pair the GPS using the multipoint
pairing.
1. Turn on the headset and press and hold the (–) Button for 5 seconds
until the red LED is rapidly flashing and you hear multiple beeps.
2. Within 2 seconds, press and hold the (+) Button for 1 second, then
the LED turns to blue flashing and the beeps turn to high tone double
beeps. You will hear a voice prompt saying “
Multipoint pairing
”.
3. Search for Bluetooth devices on the GPS navigation screen. Select
the Caberg JSE in the list of the devices detected on the GPS.
4. Enter 0000 for the PIN.
5. The GPS confirms that pairing has completed and the JUST SPEAK
EVO is ready to use. You will hear a voice prompt from the JUST
SPEAK EVO saying “
Your headset is paired
”.
6. If the pairing process is not completed within three minutes, the JUST
SPEAK EVO will return to stand-by mode.
