10
Operator’s Manual
Edition 7/06
Installation
MACH4
3.4.2
Connection to a computer or computer network
⇒
Connect the label printer to a computer or network by a suitable cable.
Please refer to the
"Configuration Manual"
for details of the configuration of the individual interfaces.
3.5
Switching the Label Printer On and Off
When all connections have been made:
⇒
Switch the printer on at the power switch Fig. 1 (8).
The printer performs a system test, and then shows the system status "
ready
" in the display,
Fig. 1 (17).
If an error occurs during the system test, the symbol
and type of error are displayed (see section 9.1
⇒
Switch the printer off at the power switch Fig. 1 (8) after finishing work.
Inadequate or no grounding can cause malfunctions during operations.
Ensure that all computers and cables connected to the label printer are grounded.
