CAB Hermes+ Operator'S Manual Download

Page: 30 / 32

Licences

9.2

EC Declaration of Conformity

Gesellschaft für Computer-

und Automations-

Bausteine mbH & Co KG

Wilhelm-Schickard-Str. 14

D-76131 Karlsruhe,

Germany

EC Declaration of Conformity

We declare herewith that the following device as a result of design, construction and the version put in circulation

complies with the relevant fundamental regulations of the EC Rules for Safety and Health. In the event of any alteration

which has not been approved by us being made to any device as designated below, this statement shall thereby be

made invalid.

Device:

Label Printer

Type:

Applied EC Regulations and Standards:

Applied Norms:

Directive 2004/108/EC relating to electromagnetic compatibility • EN 55022:2010

• EN 55024:2010
• EN 61000-6-2-2005

Signed for, and on behalf of the Manufacturer :

cab Produkttechnik Sömmerda

Gesellschaft für Computer-

und Automationsbausteine mbH

99610 Sömmerda

Sömmerda, 12.04.2013

Erwin Fascher

Managing Director

9.3

FCC

NOTE : This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial environment. The equipment

generates, uses, and can radiate radio frequency and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications. Operation of this equipment in

a residential area is likely to cause harmful interference in which case the user may be required to correct the

interference at his own expense.

Summary of Contents for Hermes+

































Search results

Summary of Contents for Hermes+

Reviews:

Related manuals for Hermes+

Brands by name

Popular brands

CAB Hermes+, Operator'S Manual

Search results

Summary of Contents for Hermes+

Reviews:

Related manuals for Hermes+

Brands by name

Popular brands