manualshive.com logo in svg

CAB EOS4, Configuration Manual, Page: 42 / 48

Share
Download
CAB EOS4 Configuration Manual Download Page 42

42

42

9 

Storage Devices

Label descriptions, graphics, fonts, and database information can be saved for the long-term on memory media. 

i

Notice!

 

Always create a backup copy of external devices in case of a malfunction.

9.1  

Suitable Storage Devices

External Devices

•  USB flash drive at USB master interface.

Internal Devices

•  approx. 16 MByte flash memory inside the printer (Internal Flash File System IFFS) 

 

9.2 

Installation

For external storage devices only!

1.  Insert USB flash drive into an USB master interface.
2.  Start Offline menu.
3.  Check if the menu 

Storage device

 is shown on the display.

If the menu 

Storage device

 is not shown, the used device is possibly not selected as 

Default storage

 

 4.1.4 on page 16.

!

Attention!

Risk of data loss !

 

Do not remove the storage device while it is being accessed.

9.3 

Directory Structure

On USB flash drives connected to the printer, some folders are automatically generated when uploading files to the 

flash drive :

Folder name Contents

..

export.log

fonts

Font files

images

Graphic files

labels

Label description files

misc

Firmware, Setup and TMP files

Table 20 

Directory structure of storage devices

Summary of Contents for EOS4

















































Reviews:

No comments