38
38
6
Service Functions
6.7
Save Log files
Access only with storage device defined as
Default storage
!
The function
Save log files
saves a file with the name export.log on the storage device. That file contains the
printer settings and the executed processes since the last startup. The function supports the firmware programmer in
localizing errors.
1. If the log file should be saved to an USB flash drive, select
USB Memory
as
Default Storage
and insert USB
flash drive into a USB master interface.
If the log file should be saved on the Internal Flash File System, select
IFFS
as
Default Storage
.
2. Start Offline menu.
3. Select
Service
.
If the menu is protected via a PIN a prompt appears in the display. Enter the code number and confirm with
OK
.
4. Select
Save log files
.
The file export.log will be saved in the root of the storage device.
5. Confirm with
.
The printer returns to the
Service
menu.
6.8
Printer Model
Access only with service key inserted!
The device designation can be changed with the
Printer model
function.
1. Start Offline menu.
2. Select
Service
>
Printer model
.
3. Select the desired model.
The printer returns to the
Service
menu.
Following all test printout, the short status and the web interface show the chosen printer model.