manualshive.com logo in svg

CAB EOS4, Configuration Manual, Page: 34 / 48

Share
Download
CAB EOS4 Configuration Manual Download Page 34

34

34

5 

Test Functions

5.9 

Event Log

Access only with service key inserted!

The label printer saves the following events in the 

Event log

:

•  Hardware fault
•  Printhead replacement
•  Firmware updates
•  Resetting of the service counters
The printout occurs using the heat level and print speed specified in the 

Setup > Print param.

 menu. 

i

Notice!
The printout occurs without taking the label gaps into consideration. This is why endless media are most 

suitable for this purpose.

 

Insert service key into a USB master interface.

 

Insert printable medium (labels, endless paper) which extends across the entire printing width.

 

If the printout is to occur using thermal transfer printing, insert transfer ribbon with the maximum width.

 

Start Offline menu.

 

Select 

Test > Event log.

Event log

Mon Jan 21 08:13:57 2013

EOS1/300

Firmware V4.13 (Jan 15, 2013) - #170113310794

Date

Description

23.11.11 11:14

Clear service counters

30.11.11 10:42

Firmware update -> V4.04 (0000)

28.03.12 08:08

Firmware update -> V4.07 (0000)

25.08.12 11:12

New printhead, 8 dots/mm, #04-007

06.09.12 14:39

New printhead, 12 dots/mm, #0X-01024

03.01.13 13:01

Clear service counters

15.01.13 08:40

Firmware update -> V4.13 (0000)

Fig. 19 

Event log

Summary of Contents for EOS4

















































Reviews:

No comments