CAB EOS4, Configuration Manual

Page: 21 / 48

20 21
4 Configuration
The following parameters for the Ethernet or WLAN interface can only be accessed via the web interface:
Parameter Meaning Default
Hostname Printer name for identification in the network generated from
OEM name
and the last six
numbers of the
MAC address
Raw-IP-Port
Service for printing on the network

”2.1.1” on page 6.

Select a predefined port address.
9100
LPD
Activation of the network printing service LPD

”2.1.1” on
page 6:

Set parameter to "On".

Typically activate the queue name "lp". Several print
spoolers work without queue name.
Off
LPD queue name Activation of the LPD queue name lp
SNMP Data exchange between printer and management station via
SNMP (Simple Network Management Protocol). To activate:

Set parameter to "On".

Assign the "Community" parameter the value "public".
Off
SOAP Activation of the protocol SOAP (Simple Object Access
Protocol)
Off
Time service Activation of a service to synchronize date and time of the
printer.
NTP
Time server IP address of the time server Off
Table 9 Additional network parameter
The following passwords can be set in the Setup tab :
Parameter Meaning Default
PIN Password to protect certain parameters and functions accessible by
the control panel.
0000
Web interface Password for parameter setting via the web interface

Logon as admin
admin
FTP print Password for FTP printing

Logon as ftpprint
print
FTP card Password for FTP access to storage devices (USB stick, IFFS)

Logon as ftpcard
card
FTP admin Password for FTP firmware update

Logon as ftpadmin
admin
Table 10 Passwords