10
11
4.1
Configuration via Control Panel
A host of parameters for configuring the printer are found in the
Setup
menu of the offline menu.
Configure the printer via the control panel during initial commissioning and when making major changes to the
operational conditions.
For changes required for processing different print jobs use software settings.
i
Notice!
The
Setup
menu can be protected from unauthorized access via a code number (PIN).
4.1.1
Local Settings
Start Offline menu.
Select
Setup > Local settings
.
Parameter
Meaning
Default
Language
Setting the display language
English
Country
Setting the country-specific date and time formats.
The time formats can also be overwritten via software. The
changes are not saved permanently, however.
Germany
Timezone
Adaptation of the time display of the printer to the time zone in
relation to UTC (Universal Time Coordinated).
UTC+1
Daylight saving
Selection of the daylight saving regulation applicable for the
region. The time is then changed automatically.
EU
Date
Setting of the system date in the format DD.MM.YYYY.
The print output of the date occurs in the format set via the
Country
parameter.
The date can also be changed via software. The change is not
saved permanently, however.
-
Time
Setting the system time in the HH:MM:SS format. When
changing the time, ensure that the
Timezone
,
Daylight
saving
and
Date
parameters are set correctly.
The time can also be synchronized automatically via the internet
using the Ethernet interface. The print output of the time occurs
in the format set via the
Country
parameter.
The time can also be changed via software. The change is not
saved permanently, however.
-
Keyboard
Setting of the keyboard layout when using an external
keyboard.
If keyboard is not connected, access only with service
key inserted!
Automatic
(=Setting
Country
)
Table 3
Parameters of the menu
Setup > Local settings
4
Configuration
