15
6
Maintenance
6.1 Cleaning
!
Warning!
Disconnect the printer from the electrical outlet.
!
Attention!
Risk of injury. The cutter blades are sharp.
2
2
1
3 4
4
1. Remove the cutter from the printer.
2. Loosen the screws (2,4) and remove the cover sheets (1,3).
3. Remove dust and paper particles with a soft brush or a vacuum.
4. For cleaning the circular blade it is possible to turn the axle (6) with a
screwdriver for slotted head screws (slot width 7 mm). The rotation angle
of the circular blade is limited to 120°.
5. If it is necessary to turn the circular blade further, loosen the screw (5)
about 5 mm. Now the circular blade can be turned completely.
6. Remove all deposits at the cutter blades with isopropyl alcohol and a soft
cloth.
5
6
