14
14
4.2
Loading Media
4.2.1
Positioning the Media Roll on the Roll Retainer
4
3
1
2
5
Figure 12
Loading media
1. Open cover.
2. Fold down the applicator (5)
3. Turn the ring (2) at the margin stop (1) counterclockwise, so that the arrow points to the symbol
, and thus
release the margin stop.
4. Remove the margin stop (1) from the roll retainer (4).
5. Load label the roll (3) on the roll retainer in such a way that the printing side of the labels is visible from above.
6. Re-mount the margin stop (1) onto the roll retainer (4). Push the margin stop (1) to the roll (3) until the roll touches
both margin stops and a clear resistance is encountered.
7. Turn ring (2) clockwise, so that the arrow points to the symbol
, and thus fix the margin stop (1) on the roll
retainer (4).
8. Supply a longer label strip of approx. 60 cm.