12
12
3.2 Adjusting the Pressure Rollers
1
2
3
2 4 1 5
•
Move the pressure roller at the cap side to such a position that the cap (4)
will be guided by the swing arm (5) and the pressure roller (2).
•
Adjust the pressure roller at the other side to the cylindrical zone of the
tube (3).
Loosen the screws (1), shift the holders of the pressure rollers (2)
sidewards and tighten the screws
3.3 Adjusting the Transport Rollers
1
3
2
4
•
Move the transport rollers to such a position that the cap (3) will be guided
by the swing arm (4) and the transport rollers (2).
Loosen the screws (1), shift the transport rollers (2) sidewards on the axles
and tighten the screws