11
3.1 Adjusting the Swing Arms
The positioning of the swing arms is depending on the following dimensions:
L1
B
C
•
L1 - Length of the tube
•
B - Width of the label
•
C - Distance of the label to the upper edge of the tube
On the applicator there is a scale (1) to position the swing arms.
•
If dimension C is not defined the edges P1 and P2 can by set to the value
L1.
•
If dimension C is defined both swing arm must be displaced by the value
V = 2*C + B - L1
From this follow the settings:
Cap side:
P1 = L1 + V
other side:
P2 = L1 - V
Example:
L1 = 76, B = 40, C = 22 -> V = 8, P1 =
84
, P2 =
68
1 2 3
P2
2 3
P1
Loosen the screws (2), shift the swing arms (3) to the positions P1 and P2
and tighten the screws.
