98
cab Produkttechnik GmbH & Co KG
A3-2 / A3 / A4 / A6
10. Memory Cards
Format Card
This option will format and delete all data from a memory card. This option
must be used if the message "Unknown card" or "Structural err." is displayed
on the LCD. To protect the card from unauthorized formatting, a code number
(PIN) can be set (see the "Printer Configuration - Security" section).
1. Switch from "Online" mode to the Offline Menu by pressing the
key.
The "Memory card" menu is displayed on the LCD. Press the key.
2. Select the "Format card" option using the key or the key. Press the
key.
3. The "Format card" option is displayed on the LCD with a default selection
of "No".
4. Change the selection to "Yes" using the key or the key. Press the
key. If the "Format card" option is not protected by a PIN, the
formatting will begin immediately.
5. If the "Format card" option is protected by a PIN, "PIN: 0000" appears on
the display requesting input. The numbers of the PIN may be changed
using the key and the key. The number to be changed will be
flashing on the display. You can switch to the next number by pressing the
key. If the input of all numbers is correct, the formatting will begin.
CAUTION !
During formatting, DO NOT remove the memory card from the printer!
6. After completing the memory card formatting, the memory card capacity is
displayed on the bottom line of the LCD.
7. Press any key to return to the "Memory card" menu selection list.
Summary of Contents for a3-2
Page 1: ...Edition 10 04 Thermal direct Printer Transfer Printer Operator s Manual...
Page 77: ...77 cab Produkttechnik GmbH Co KG A3 2 A3 A4 A6 A B D C E F 9 Test Options Fig 9l Status Print...
Page 83: ...83 cab Produkttechnik GmbH Co KG A3 2 A3 A4 A6 9 Test Options Fig 9o Printhead Profile...
Page 87: ...87 cab Produkttechnik GmbH Co KG A3 2 A3 A4 A6 9 Test Options Fig 9s Test Grid...
