70
cab Produkttechnik GmbH & Co KG
A3-2 / A3 / A4 / A6
Parameter
Meaning
PIN
Set, erase, change a PIN number to
protect certain functions
Default :
Off
Security
Table 8f Overview of the "Security" Menu
Setup
Security
Selection
Off
On
Change
1. Switch from "Online" mode to the Offline Menu by pressing the
key.
2. Select the "Setup" menu.
3. Select the "Security" menu.
PIN
With this menu it is possible to set, erase or change a four-digit code number
(PIN). If the PIN is activated, access to the "Setup" menu, certain functions of
the memory card and upgrading of the firmware is only possible after the PIN
number is entered. This allows protection against unauthorized access to
certain settings and functions.
Menu's that are protected will display the symbol .
To set a code number for the first time, choose the "On" option. The first line of
the display appears "New PIN" and the second line displays "0000" to enter the
new pin. With the key and the key the numbers of the PIN can be
changed. The field to be changed will be flashing on the display. Press the
key to switch to the next number.
To change the PIN, select "Change". The directions to change a PIN are the
same as entering a new PIN number.
To disable the PIN, select "Off". The previous PIN will be erased permanently.
8. Printer Configuration
Summary of Contents for a3-2
Page 1: ...Edition 10 04 Thermal direct Printer Transfer Printer Operator s Manual...
Page 77: ...77 cab Produkttechnik GmbH Co KG A3 2 A3 A4 A6 A B D C E F 9 Test Options Fig 9l Status Print...
Page 83: ...83 cab Produkttechnik GmbH Co KG A3 2 A3 A4 A6 9 Test Options Fig 9o Printhead Profile...
Page 87: ...87 cab Produkttechnik GmbH Co KG A3 2 A3 A4 A6 9 Test Options Fig 9s Test Grid...
