60
cab Produkttechnik GmbH & Co KG
A3-2 / A3 / A4 / A6
Parameter
Meaning
Printhead pos.
Shift the print image on the label
X
left to right.
Default :
0.0 mm
Printhead pos.
Shift the print image on the label
Y
top to bottom.
Default :
0.0 mm
Tear-off pos.
Shift the tear-off position
Default :
0.0 mm
Demand sensor (only displayed when the optional
Present Sensor or Peel-Off Adapter is installed)
Peel position
Shift the position of the dispensed
label relative to the dispense plate
Default :
0.0 mm
Backfeed
Delay time between removing the
delay
label from the peel position and the
backfeed of the label
Default :
250 ms
Limit peel-off
Limitation of the print speed in the
spd.
peel-off mode to 100 mm/s
Default :
A3 - On
A3-2/A4/A6 - Off
Table 8c Overview of the "Machine parameters" Menu
Setup
Machine parameters
Selection
9,9
...
0,0
+9,9
...
-9,9
+9,9
...
-9,9
+9,9
...
-9,9
500 ms
...
0 ms
in 50 ms
increments
On
Off
Machine Parameters
1. Switch from "Online" mode to the Offline Menu by pressing the
key.
2. Select the "Setup" menu.
3. Select the "Machine parameters" menu.
8. Printer Configuration
Summary of Contents for a3-2
Page 1: ...Edition 10 04 Thermal direct Printer Transfer Printer Operator s Manual...
Page 77: ...77 cab Produkttechnik GmbH Co KG A3 2 A3 A4 A6 A B D C E F 9 Test Options Fig 9l Status Print...
Page 83: ...83 cab Produkttechnik GmbH Co KG A3 2 A3 A4 A6 9 Test Options Fig 9o Printhead Profile...
Page 87: ...87 cab Produkttechnik GmbH Co KG A3 2 A3 A4 A6 9 Test Options Fig 9s Test Grid...
