E-6
cab Produkttechnik GmbH & Co KG
A3-2 / A3 / A4 / A6
1
2
3
3
4
5
6
7a
7c
8
7b
9
Appendix E - Replacing Assembly Units
Replacing the Print Roller and the Rewind Assist Roller
NOTICE !
There is described the replacement of the print roller and the rewind
assist roller for the P-version printer types in this chapter.
The replacement of the print roller at the other printer types can be made
in the same way !
Fig. E-6 Changing Print Roller and Rewind Assist Roller (I)
1. Lift the printhead up and swing the locking system (
5
) away from the
rewind assist roller (
4
). Remove the media from the printer.
2. Take the Allen key (
8
), loosen the screws (
3
) and remove the dispense
plate (
2
).
3. Remove the three screws (
7
).
4. Remove the plate (
9
) and the printhead support (
6
) from the axle of the
print roller (
1
) and the rewind assist roller (
4
).
WARNING !
Unplug the power cord from the power source before starting!
Summary of Contents for a3-2
Page 1: ...Edition 10 04 Thermal direct Printer Transfer Printer Operator s Manual...
Page 77: ...77 cab Produkttechnik GmbH Co KG A3 2 A3 A4 A6 A B D C E F 9 Test Options Fig 9l Status Print...
Page 83: ...83 cab Produkttechnik GmbH Co KG A3 2 A3 A4 A6 9 Test Options Fig 9o Printhead Profile...
Page 87: ...87 cab Produkttechnik GmbH Co KG A3 2 A3 A4 A6 9 Test Options Fig 9s Test Grid...
