23
6.6
Lift Speed of Cylinder Z
1
2
4
3
5
Fig. 23
Throttle valves of cylinder Z
The movement speed of the pad can be regulated via two throttle valves (1, 3).
Adjust the pad movement speed as necessary.
To increase the downward speed turn the screw (4) at the lower valve (3) counterclockwise.
To increase the upward speed turn the screw (2) at the upper valve (1) counterclockwise.
i
Note!
The severity of the impact of the pad onto the product is mainly dependant on the downward motion of the
cylinder Z.
In order to reduce the impact of the pad onto the product turn the screw (4) clockwise.
!
Attention!
The time for the downward movement of the pad may not exceed 2 seconds, otherwise the error message
"
Lower position
" will appear.
i
Note!
To reduce the air pressure in direction Z it is possible to use an optional pressure reduction valve (5).
7.8 Adjusting the Options for Movement in Direction Z