13
6
Licences
6.1
Declaration of Incorporation
cab Produkttechnik
GmbH & Co KG
Wilhelm-Schickard-Str. 14
D-76131 Karlsruhe
Deutschland
Declaration of Incorporation
We declare herewith that the following „partly completed machinery“ as a result of design, construction and the version
put in circulation complies with the essential requirements of the
Directive 2006/42/EC on machinery
:
Annex I, Article 1.1.2, 1.1.3, 1.1.5, 1.1.6, 1.2.1, 1.3.2, 1.5.2, 1.5.8, 1.6.3, 1.7
In the event of any alteration which has not been approved by us being made to any device as designated below, this
statement shall thereby be made invalid.
Device:
Stroke-Turn Applicator
Type:
4214
Applied EU Regulations and Norms:
Directive 2006/42/EC on machinery:
•
EN ISO 12100:2010
•
EN ISO 13849-1:2015
•
EN 60950-1:2006
+A11:2009+A12:2011+A1:2010+A2:2013
Person authorised to compile the technical file:
Erwin Fascher
Am Unterwege 18/20
99610 Sömmerda
Signed for, and on behalf of the Manufacturer:
cab Produkttechnik Sömmerda
Gesellschaft für Computer-
und Automationsbausteine mbH
99610 Sömmerda
Sömmerda, 08.07.2019
Erwin Fascher
Managing Director
The product must not be put into service until the final machinery into which it is to be incorporated has been declared in
conformity with the provisions of the Directive on machinery.
The documents according annex VII part B from the incomplete machinery are created and will commit to state agencies
on request in electronic kinds.
