C2R 30-005, User Manual

Page: 90 / 183

Colibri serie 6 : User’s guide
© 2000-2012 C2R Technologie, Sarl. All rights reserved.
90 90
Rev. A
UPC-A Addenda Required
When
Required is scanned, the imager will only read UPC-A bar codes that have addenda.
You must then turn on a 2 or 5 digit addenda listed Default = Not Required.
UPC-A Addenda Separator
When this feature is on, there is a space between the data from the bar code and the data
from the addenda. When turned off, there is no space. Default = On.
UPC-A/EAN-13 with Extended Coupon Code
Use the following codes to enable or disable UPC-A
and EAN-13 with Extended Coupon
Code. When left on the default setting ( Off ), the scanner treats Coupon Codes and Extended
Coupon Codes as single bar codes.
If you scan the
Allow Concatenation code, when the scanner sees the coupon code and the
extended coupon code in a single scan, it transmits both as separate symbologies. Otherwise,
it transmits the first coupon code it reads.
If you scan the
Require Concatenation code, the scanner must see and read the coupon
code and extended coupon code in a single read to transmit the data. No data is output unless