C2R 30-005, User Manual

Page: 82 / 183

Colibri serie 6 : User’s guide
© 2000-2012 C2R Technologie, Sarl. All rights reserved.
82 82
Rev. A
Code 93
Default
Code 93 Enabled
Code 93 Message Length
Scan the bar codes below to change the message length. Refer to Message Length
Description for additional information. Minimum and Maximum lengths = 0-80. Minimum
Default = 0, Maximum Default = 80.
Code 93 Code Page
Code pages define the mapping of character codes to characters. If the data received does
not display with the proper characters, it may be because the bar code being scanned was
created using a code page that is different from the one the host program is expecting. If this
is the case, scan the bar code below, select the code page with which the bar codes were
created (see Code Page Mapping of Printed Bar Codes), and scan the value and the
Save bar
code from the Programming Chart on the inside the back cover of this manual. The data
characters should then appear properly.
Straight 2 of 5 Industrial (three-bar start/stop)
Default