C2R 30-005, User Manual

Page: 135 / 183

Colibri serie 6 : User’s guide
© 2000-2012 C2R Technologie, Sarl. All rights reserved
135
Rev. A
Chapter 10
– Utilities
To Add a Test Code I.D. Prefix to All Symbologies
This selection allows you to turn on transmission of a Code I.D. before the decoded
symbology. (See the Symbology Chart, included in the Appendix A) for the single character
code that identifies each symbology.) This action first clears all current prefixes, then
programs a Code I.D. prefix for all symbologies. This is a temporary setting that will be
removed when the unit is power cycled.
Add Code I.D. Prefix to All Symbologies (Temporary)
Show Decoder Revision
Scan the bar code below to output the decoder revision.
Show Scan Driver Revision
Scan the bar code below to output the scan driver revision. The scan driver controls image
capture.
Show Software Revision
Scan the bar code below to output the current software revision, unit serial number, and other
product information.
Show Revision
Show Data Format