WHITE POOL INSTRUCTION MANUAL
pag. 20 / 29
www.cpa-piscine.it
Rev.00
–
16/10/20
VIII.
Fixing the pool wall
Put the pool wall on a ground cloth, cardboard or a piece of ply wood (see diagram 19). This is to protect the levelled ground while
installation of pool wall is taking place. Make sure the square window (for skimmer) is on the upward side.
It is advisable to wear protective gloves when handling the metal wall.
Diagram 19
Diagram 20
You should decide where the skimmer and filtration system should be placed. The opening end of the pool wall closest to the
square window should be placed on the closest metal piece to your selected location for the electric supply of the filtration system.
The pool wall end should be resting in the bottom rail (see diagram 20). Make sure that this location is not in a windward position.
Square window should be in the upward position.
Diagram 21
Then uncoil the whole pool wall onto the ground rail. Join the 2 ends of the pool wall together. Line up the screw holes. If you
could not line up the holes, then adjust the gap distance of the 2 ends of bottom rails (see diagram 21).
18
17
16
skimmer
opening
1
