30
For more advanced settings and initial setup of sprayer press the
Sprayer Setup
button.
Using the chemical rinse
1. Make sure the PTO is off.
2.
¼ turn clockwise the handle on the “L port” tap attached to the filter and directly under the rinse tank.
This will allow water from the fresh water tank to be pumped to the valve bank.
3. Turn on the red handled tap for the chemical rinse (part of the electronic valve bank).
4.
Switch on the PTO, press “Settings”, press “More” then adjust the pressure by pressing “Up” or “Down”
5. C-Dax recommends returning the taps to their original position once you have finished rinsing the tank.
Adjust pressure