10
Ratchet Strap
Secure the tank to the carrier frame using the ratchet strap provided. Route the strap as shown below ensuring
the strap is positioned over the “wings” of the auxiliary tank as shown, nearest to the centre of the tank as
possible. The tie-down hooks must not be located where they can rub against the tank and cause damage.
NB: Tiedown goes through the cavity at the rear of the SR35
Vacuum Release Valve
Locate the vacuum release valve and screw the valve tightly onto the fitting next to the lid of the tank.
Place both hooks at
the front.
Loop strap
under carrier
frame
Tighten ratchet so
that tank sits
centrally on frame
Summary of Contents for SPRAYRIDER Generation 2
Page 19: ...19 SR50 80 PARTS DIAGRAM...
Page 22: ...22 SR35 PARTS DIAGRAM...
