BZBGEAR BG-UM44-100M-KIT, User Manual, Page: 19 / 43

A B
- 17 / 30 -
G
PC
5
PIN5: GND
9
4
8
3
7
PIN3: RXD
2
PIN2: TXD
6
1
5
9
PIN5: GND
4
8
3
7
PIN3: TXD
2
6
PIN2: RXD
1
RS-232 DB9, Female RS-232 DB9, Male
Figure 4: 3-pin phoenix connector to USB
11. Web GUI User Guide
The Matrix can be controlled by Web GUI. The operation method is shown as below:
Step 1: Get the current IP Address.
The default IP address is 192.168.1.100. You can get the current Matrix IP address in two ways:
The first way: You can get the IP address via panel buttons. On the initial OLED display, press
“MENU” button to enter the Matrix switching state interface, then press “UP/DOWN” button to
check the current IP address.
The second way: You can get the IP address via RS-232 control . Send the ASCII command
“ r ipconfig!” through a Serial Command tool, then you’ll get the feedback information as shown
below:
IP:192.168.62.109 in the above figure is the IP Address of the Matrix (the IP address is