8
6.2
Setting Commands
Command
Description
Command Example and
Feedback
>SetUpdateEdid
Upload user-defined EDID. The EDID
DIP switch must
be set as “1111”.
<User edid ready,Please
send edid data in 10s.
<SetUpdateEdid_True/False
/
<Time out to send edid
>SetInPortEdid [Param]
Set the EDID to [Param].
[
Param]=0~7.
0 - BYPASS
1 - 1920x1080@60 8bit Stereo
2 - 1920x1080@60 8bit High Definition
Audio
3 - 3840x2160@30Hz 8bit Stereo Audio
4 - 3840x2160@30Hz Deep Color High
Definition Audio
5 - 3840x2160@60Hz Deep Color
Stereo Audio
6 - 3840x2160@60Hz Deep Color HDR
LPCM 6CH
7 - USER EDID
The EDID DIP switch should be set as
“1111”.
>SetInPortEdid 0
<InPortEdid 0
>GetInPortEdid
Get the EDID.
<InPortEdid 0
>SetHdcpActiveMode
[Param]
Set the HDCP active mode.
[Param]=
Src, Sink
Src - Active by Src. Follow source.
Sink - Active by Sink. Follow display.
Note: The EDID switch must be
s
witched to “1111” before sending the
command.
>SetHdcpActiveMode Src
<HdcpActiveMode Src
>GetHdcpActiveMode
Get the HDCP active mode.
<HdcpActiveMode Src
>SetVideoOutput
[Param1],[Param2]
Enable or disable video output.
[Param1]=1~24. Output port.
[Param2]=
EN, Dis
Dis - Disable
En - Enable
>SetVideoOutput 1,EN
<VideoOutput 1 True
>GetVideoOutput
Get video output status.
>GetVideoOutput 1
