BZB Gear BG-PSC6X2-4K, User Manual, Page: 10 / 17

RS232 and Telnet Commands
No. Command Action
1 ? Print Help Information
2 HELP Print Help Information
3 STATUS Print System Status And Port Status
4 PON Power On, System Run On Normal State
5 POFF Power Off, System Run On Power Save State
6 IR ON/OFF Set System IR Control On Or Off
7 KEY ON/OFF Set System KEY Control On Or Off
8 LCD ON/OFF Set LCD Always On or Auto Turn Off In Power On State
9 RSB x
Set RS232 Baud Rate to x bps
X= [0:115200, 1:57600, 2:38400, 3:19200, 4:9600]
10 RESET
Reset System To Default Setting
(Should Type "Yes" To Confirm, "No" To Discard)
11 RESET ALL
Reset System And Network To Default Setting
(Should Type "Yes" To Confirm, "No" To Discard)
12 OUT xx ON/OFF Set Output: xx On Or Off
13 OUT xx FR yy
Set OUTPUT:xx From INPUT:yy
xx=00: Select All OUTPUT Port
xx=[01...02]: Select One OUTPUT Port
yy=Select One Input Port
[01
…03:HDMI, 04:DP, 05:USB-C, 06:VGA]
14 OUT OSD ON/OFF Set Scaler OSD Show On or Off
15 OUT RES rr
Set Scaler Output Resolution
(Change Output Resolution Will Effect VGA EDID Setting)
Rr=00: 1024x768@60Hz
rr=01: 1280x1024@60Hz
rr=02: 1360x768@60Hz
rr=03: 1440x900@60Hz
rr=04: 1680x1050@60Hz
rr=05: 1920x1200@60Hz
rr=06: 720p@50Hz
rr=07: 720p@60Hz
rr=08: 1080p@50Hz
rr=09: 1080p@60Hz
rr=10: 4K2K@25Hz
rr=11: 4K2K@30Hz