Byron DIC-23312, Instruction Manual

Page: 9 / 136

Instruction manual
9
3.7 CONNECTING A DOOR LOCK (NOT
INCLUDED)
It is possible to connect a lock to the outdoor unit that can be opened,
using the monitor. Door locks are sold separately. Article no: DB5005
& DB5005L
To connect the door lock, you will need the following tool:
ü
A small flat head screw driver.
A. On the outdoor unit: Loosen the terminal screws. (see sticker on
the outdoor unit for position)
B. Insert the wires (any order)
C. Fasten the terminal screws.
D. On the lock: Loosen the two terminal screws. (Please check the
manual of your door lock for more details.)
E. Insert the wires (any order)
F. Fasten the terminal screws.
3.8 INSERT SD CARD
Make sure the device is not connected to the power adapter
when inserting the SD card.
ü The SD card is required for recording footage (including cloud
storage) as well as continuous firmware updates of the device.
Follow below procedure to insert the SD card:
A. On the side of the doorbell you can find the SD card slot. Insert
the SD card (max. 128GB).
3.9 REPLACE CALL BUTTON
An extra call button is added to the box. This button is marked with a
bell to avoid confusion on where to push.
The original call button (without marking) on the outdoor unit is
replaceable.
You can use the blank button for engraving your name.
4 Preparation before use
Connect the indoor unit (monitor) to Wi-Fi
1. Press the setting icon
2. Press the Wi-Fi icon
3. Select the Wi-Fi network you want to use
4. Input the Wi-Fi password and press the ‘Enter’ icon to confirm
5. Your device is now connected to Wi-Fi
5 BYhome App
App installation
A. Open the App Store (iOS) or Google Play Store (Android) on your
mobile device.
B. Search and install BYhome app.
C. The BYhome app icon appears on your phone.
ð When you open the app for the first time, you are asked to allow
notifications. Please do so, in order to have the app work
properly.
EN