BYK-Gardner GmbH
Configuration | 7
300 100 114 E 2103
micro-TRI-color
45
7.6 Perform Factory Reset
A factory reset clears following data in the instrument memory:
• All readings
• All settings
• Calibration details
• Connected WiFi networks
• Counter for measured samples
1. Go to
Configuration
>
Factory Reset
.
2. The screen below is displayed.
Illustration 52:
Factory reset – confirmation request
3. Click on the checkmark in the upper right corner.
4. The data is cleared and the screen below is displayed.
Illustration 53:
Factory reset – confirmation message
5. The confirmation message disappears after few seconds.
The instrument is now in the state of delivery.
Note:
To perform just a reboot see
.
Summary of Contents for micro-TRI-color
