TANG
DM
&
EV
17
opened, the gearshift lever will automatically shift to P position for safety.
P: parking gear position
With the gearshift lever placed at this position, the motor for P position will be locked up and
the switch indicator will light up. At this moment, the vehicle is shifted to P position.
Manual parking: Pull up the EPB switch.
The indicator on the instrument will flash
first before staying on. If this indicator
stays on, it indicates that the EPB has
been applied.
Manual EPB releasing: When the vehicle
has been powered up (OK) or started and
the vehicle is in a gear position other than P (parking) position, depress and keep holding
the brake pedal and press the EPB switch to release the EPB until the indicator on the
instrument is off, which indicates that the EPB has been released, and then the instrument
will display the message of "EPB deactivated".
Applying the EPB automatically
■
Applying the EPB automatically upon power-off:
●
After stopping the vehicle by depressing the brake pedal, press the START/STOP
button to stop the engine (the power mode is switched from ON to OFF), the EPB
will be pulled up automatically. Release the brake pedal when the indicator
on
Electric Parking Brake (EPB)
P position refers to the parking position. When the gearshift lever is in P position, it is in
a stable parking state. EPB is a main parking device of the vehicle. To ensure the
vehicle's parking safety, releasing the EPB with the EPB switch can only be achieved
when the gearshift lever is no in P (parking) position.
Never place the gearshift lever to R position when the vehicle is driving forward. Be
sure to place the gearshift lever to R position after confirming that the vehicle is
completely stopped.
Summary of Contents for TANG DM 2019
Page 1: ......
