MAINTENANCE OF VEHICLES
USER MANUAL
40
EPS14Pi
41
DESCRIPTION
1. SHAPE
(1)
Check whether the forklift is damaged or deformed.
(2)
Check whether oil is leaked on the ground where forklifts are put.
(3)
Check whether nameplates or signs are complete.
(4)
Check whether parts are loose or fall off.
Note
If oil leaks, please identify the position and contact after-sale personnel of BYD.
9. Electric check
(1)
Check whether connection terminals of electric device are loose. If any, tighten it.
Check whether joints among the wiring-connected sections are abnormally.
(2)
Check whether the safety device of the master controller works normally. If necessary,
replace it. Check whether the copper bar of the master controller is burned. If
necessary, replace it.
(3)
Check whether the low-voltage insurance and relay can work normally. If necessary,
replace them.
2.
WHEELS
3.
MAST
(1)
Check whether the cylinder and oil tube on the working device leak.
(2)
Check whether the working device is distorted or broken and whether clamp devices
such as bolts are loose or fall off.
(1)
Check whether the battery voltage and power on the instrument are displayed normally.
(2)
Check whether a fault indicating lamp appears on the instrument.
6. WARNING DEVICE
4. HYDRAULIC OIL
Check the device through the level of hydraulic oil.
5. INSTRUMENT
(1)
Press “horn” button and check whether the horn can honk.
(2)
Check whether other warning devices are working normally.
(1)
Check whether the fastener of wheels is loose. If any, tighten it.
(2)
Remove debris embedded in the tire.
(3)
If wheels are worn seriously wherein the wear between left and right wheels are uneven, or rims
are found broken or bent, please replace wheels.
7.
BRAKE PERFORMANCE
Put the handle lever in the brake area and check whether the brake performance is good.
(1)
Check whether the steering wheel can steer fluently and whether noise appears during
the operation.
(2)
Check whether buttons can work normally.
(3)
Check whether fasteners are loose or fall
.
8. DRIVING, STEERING AND CHECKING
Disconnect power before the electric check.
10.
CLEARANCE
Clean forklifts.
11. OTHER ABNORMAL PARTS
Check whether there are other abnormal parts.
Warning
OM-
EPS14Pi
2019001-EN
