1
Saf
ety
1-1 Seat Belt
21
Seat Belt Use Method
1. Adjust the seat to a proper position and adjust the backrest to a proper angle. (Refer
to 3-2 for seat adjustment method).
2. Pull out the seat belt strap smoothly
across the shoulder near the point
where the strap is pulled out and then
across the chest diagonally. Be sure not
to pull the strap across underneath of
the arm or back of the neck. The strap
provides the optimum protection when it
is positioned across the center of the
shoulder. It should not contact the neck
or slide off the shoulder.
3. Insert the seat belt tongue to the buckle
until you hear the "click"; pull the tongue
in the opposite direction to confirm it has
been locked successfully. Take care not
to twist the strap.
WARM TIP
The shoulder belt should cross the center of the shoulder. The belt should be
positioned away from the neck and not slide off the shoulder easily. Otherwise, in
case of emergency brake or accidents, the seat belt cannot protect passengers and
even cause severe injury to passengers.
The lap belt strap should cross the hip at a position as low as possible to prevent
tightening strap from injuring passengers during accident.
The seat belt strap should be close to an occupant's body to better achieve its
protection function.
Summary of Contents for BYD5030XXYBEV2
