19
BATTERY
BOX
BATTERY-BOX
PREMIUM
LVL
5.2.2
Single System Mounting
Unpacking the system
•
Unpacking the system, check the number and quality of delivered accessories
(See scope of delivery);
•
Pile B2 above B1, make sure the two alignment
pins are in the right place. Patience and slow
motion are required for this step;
•
Maximum 2 modules are allowed to be piled
together, and maximum 2 system can be piled
together
•
Screw the 4 screws on top cover of B2 module
Remove front covers
•
Remove the front cover of B2 and B1;
Fix modules
•
Use the connector to fix B1 and B2
with screw M5×14, two connectors
for two sides.
Master
Module
(B2)
Slave
Module(B1)
8mm
4.5Nm
IN OUT
COM
G
J
