B-BOX 12.8 installation guidance
19
/
30
Figure 10 communication cable connection view
d) BMS B+ connection
Operator only need to connect the positive cable lead from P+ DC BUS
to “B+” terminal on BMS.
Tools: Flat tip screwdriver, Fixed torque: 2.5±0.5kgf.cm
As show in figure 11, find the positive cable and the B+ terminal.
Figure 11
Take off the left screw on B+ terminal by screw driver, then put the battery positive cable into the
terminal, at last lock the screw again.
Battery positive
cable—Brown color
B+ terminal
