BYD ATTO 3 2022, Owner'S Manual

Page: 91 / 201

90
• After the connection is made,
discharge begins and respective
information is displayed on the
instrument cluster.
Stopping discharging Stopping discharging
• Stopping discharging
• Disconnect the load, unplug the
connector, reinsert the port cover and
close the port hatch (refer to home
portable AC charging process*).
• Store the equipment properly.
Charging Port Electric
Lock Control Function
• The vehicle's charging port features an
anti-theft function during the charging
and discharging process. This function
is disabled by default. To enable it, go to
the charging port lock setting interface
by tapping on → New energy →
Charge Settings , and tap on Enable to
turn on the anti-theft function.
• After it is enabled, users can unlock
and pull out the charging connector as
follows:
• When it is OFF, press the smart key
unlock button to unlock it;
• Press the door handle microswitch to
unlock;
• Press the center console lock below
the window inside the driver's door to
unlock it.
CAUTION
•After unlocking the charging connector,
it can be pulled out within 30 seconds.
After 30 seconds, it will lock again.
Charging Port Emergency
Unlocking
• When the electric lock fails and the
charging connector cannot be pulled
out, the lock can be manually unlocked
by pulling out the charging connector.
• Open the hood and find the inhaul
cable, and pull it to unlock the charging
connector.
Driving Range Display
• To improve driving experience, the
vehicle features a function to select the
"Driving Range Display Mode", which is
"Standard" by default.
• Set the mode in "Multimedia →
New Energy → Energy Management →
Driving Range Display Mode".
• Standard mode: The driving range is
displayed based on the result of the
comprehensive working condition
test.
• Dynamic mode: The estimated driving
range is displayed based on the
available battery power and current
average power consumption.