BYD ATTO 3 2022, Owner'S Manual

Page: 87 / 201

86
2. Stopping charging 2. Stopping charging
• Charging stops when the battery is
fully charged.
• To stop earlier, first disconnect the
charging port by pressing the door
handle microswitch while carrying the
smart key and pulling out the charging
coupler.
REMINDER
•To unlock the vehicle, press the key
unlock button (OFF when charging)
or the door handle microswitch while
carrying the smart key.
•When anti-theft is enabled, unlock
the vehicle before pulling out the
charging coupler to disable the
charging port electric lock. The
coupler has to be pulled out within 30
seconds, or the port will re-lock.
•The electric lock mode can be setup
through the → New Energy →
Charge Settings interface. For setup
procedure details, see Charge Port
Electric Lock Control function.
•If the charging coupler cannot be
removed after unlocking, a few more
unlocking attempts can be tried. If it
still cannot be removed, emergency
unlocking can be tried. Refer to the
charging port emergency unlocking
procedure in the lock control.
• Disconnect the power plug.
• Reinsert the cover and close the port
hatch.
• Store the charging equipment properly.
REMINDER
•If the charging port plug is fully open,
do not close the hatch.
WARNING
•
Never drop the Mode 2 equipment.
Never move it by pulling it directly by
its cable. When moving the device, it
needs to be handled with care. Never
move it by pulling it directly by its
cable.
AC Charging Pile Charging*
1. Equipment description 1. Equipment description
• Single-phase AC charging box*
• Use a certified household charging
box. For details, refer to the instruction
manual and follow the operating
steps.
• Single-phase AC charging box: this
equipment includes a charging box,
a connector and a connecting cable.
For information on circuit breaker and
emergency stop switch, refer to the
charging box instruction manual.