BYD ATTO 3 2022, Owner'S Manual

Page: 73 / 201

72
Enabling anti-pinch function Enabling anti-pinch function
• If the 12 V battery is disconnected while
a window is being rolled up or down,
the automatic roll-up and anti-pinch
functions of windows do not take effect.
• Close the window, release the switch,
then operate the switch and hold it for at
least 3 seconds.
WARNING
To avoid serious injury or even death,
observe the following precautions
when closing the windows:
• When controlling the windows, make
sure no body part is obstructing the
motion.
•
Never allow children to use the
electric window switches.
CAUTION
•Frequent initialization of the anti-
pinch function will trigger the thermal
protection function of the elevator
motor.
•Never activate the anti-pinch function
with a body part.
•The anti-pinch function may fail right
before the window is fully close.
•When the auto raise and anti-pinch
functions do not work, contact a BYD
authorized dealer or service provider.
Window Lock Button*
• When this button is pressed, the
driver's door switches can be used to
roll all windows up or down, the front
passenger's door switch will work
normally, but the rear door switches will
be disabled.
• When this button is pressed again, the
indicator goes off and the rear door
switches can be used normally.
Center Console Door Lock
The driver's door is equipped with an
electric door lock. These two buttons can
be used to lock/unlock all doors.
(1) Locking
(1) Locking
When the center console lock button is
pressed, all doors are locked and the red
lock indicator lights up.
(2) Unlocking
(2) Unlocking
When the center console lock unbutton is
pressed, all doors are unlocked and the red
lock indicator goes off.
• All doors are automatically unlocked
when the vehicle suffers a strong impact.